Holtop HVAC Recuperator Air to Air Plate Heat Exchanger Core Aluminium

• Customization: Available
• Certification: ISO
• Application: Energy Recovery Ventilation System
• Model NO.: HBS-ZF300/300-500-4
• Principle: Recuperative Heat Exchanger
• Style: Plate Type
• Material: Aluminium
• Airflow Stream: Cross Flow
• Heat Recovery Type: Sensible
• Maintain: Water Wash
• Core Spacing: 4-12mm
• Max Tep.: 90 Degree
• Max Section Length: 500mm
• Heat Recovery Efficiency: 70-75%
• Transport Package: Wood Cases,
• Specification: ISO9001-2008, ISO14001, OHSAS18001
• Trademark: HOLTOP
• Origin: Beijing, China
• HS Code: 8415909000
• Production Capacity: 100, 000PCS/Year

Product Description

Total heat enthaply air to air crossflow heat exchanger for energy recovery ventilator
Total heat exchanger is made of ER paper which is featured by high moisture permeability, good air tightness, excellent tear resistance, and aging resistance. The clearance between the fibers is very small, so only the moisture molecules of small diameter can go through, the odor molecules of larger diameter are unable to pass through it. By this means, the temperature and humidity can be recovered smoothly, and prevent the pollutants infiltrating to the fresh air.
 

Main Feature:

Heat recovery efficiency up to 85%
Enthalpy efficiency up to 76%
Effective air exchange rate over 98%
Selective molecule permeability
Flame retardant and mildew resistance

Working principle

The flat plates and the corrugated plates form channels for fresh or exhaust air stream. When the two air steams
passing through the exchanger crossly with temperature difference, the energy is recovered.

Performance index

E.R. paper performance introduction

 

Heat exchange paper: for heat and moisture exchange, the main performance standards are diathermancy, moisturepenetrability and air permeability.

Corrugated paper: to construct the frame for the heat exchanger, flowing passages of the air stream.

Anti-bacteria and mold prevent performance

The bacteria exists in the damp air, when air goes through the heat exchanger, bacteria may stick on the walls of the
exchanger. If the heat exchanger doesn't have the anti-bacteria ability, it will grow on the inside wall, and then
blown into indoor, which will cause indoor air pollution. That is why the anti-bacteria performance is required. The
ability of bacterial growth inhibition and killing bacteria, to prevent the production of mold, is an important factor of
heat exchanger paper.
By adding the bactericides to the surface of paper and the anti-bacteria agents to the slurry, the heat exchanger has
abilities to kill bacteria (such as Escherichia coli and staphylococcus) and inhibit fungal (such as Candida albicans)
and prevent the bacteria and germ spreading in the air. Holtop heat exchanger paper was tested by Guangzhou Industry Microbe Test Center, and shown the antibacterial effect, and its mildew grade is 0.

 

Product Specification 

 

The heat exchange paper and corrugated paper are adhesived with waterborne binder, the core and cover are sealed with special sealant to total separate the supply air and exhaust air, in order to keep the structure strength and air tightness and prevent the cross contamination. It is widely applied and the maximum temperature should not exceed 100 C.
For size A within 500mm and the size L within 600mm, the heat exchanger is built in one module. For size A bigger
than 500mm and size L bigger than 600mm, the heat exchanger is built in multi-modules.

 

 

Model	A (mm)	B (mm)	C (mm)	Optional corrugation height (mm)	Remarks
HBT-W168/168	168	≤500	240	2.0, 2.5	One module
HBT -W202/202	202	≤500	288	2.0, 2.5
HBT -W222/222	222	≤500	317	2.0, 2.5
HBT-W250/250	250	≤700	356	2.0, 2.5, 3.5
HBT-W300/300	300	≤700	427	2.0, 2.5, 3.5
HBT -W350/350	350	≤700	498	2.5, 3.5
HBT -W372/372	372	≤700	529	2.5, 3.5
HBT -W400/400	400	≤700	568	2.5, 3.5
HBT -W472/472	472	≤550	670	3.5
HBT -W500/500	500	≤550	710	3.5
HBT -W552/552	552	≤550	783	3.5
HBT -W600/600	600	≤550	851	3.5
HBT -W652/652	652	≤550	925	3.5
HBT -W700/700	700	≤550	993	3.5	Multi-module combined
HBT -W800/800	800	≤550	1134	3.5
HBT-W1000/1000	1000	≤450	1417	3.5
HBT-W1200/1200	1200	≤450	1702	3.5
HBT -W1400/1400	1400	≤450	1985	3.5
HBT -W1600/1600	1600	≤450	2265	3.5

Applications

-Direct air to air energy exchange

-Ideal for both residential and commercial application

- Suitable for airflow 300-60000 m3/h.

Holtop Factory

Holtop is one of the best manufacturer in ERV/HRV, heat exchanger and AHU area in China, founded in 2002, areas covered more than 30,000 square meters, turnover of 2012 is 42 million dollars, we have enthalpy testing lab. for products test. As a leader in energy/heat recovery equipments, we cooperate with more than 30 famous companies who located in Europe, the Middle east, Korea, Southeast Asia, Taiwan, etc. supplied equipment to Shanghai Expo 2010, works together with domestic and international brands like Midea, Haier, Hitachi, etc.

Holtop partner

Holtop cooperate with world famous brand or offer OEM service including Hitachi, LG, McQuay, TRANE, Systemair, Aldes, York, Haier, Gree, MHI Group, Midea, Carrier, Dunham-Bush, etc.

Holtop products stand for TOP quality in heat recovery ventilation filed in China, certificated by CE, Eurovent, ISO and other different approved tests like anti-flaming test, anti-mold test, energy saving product test. Etc.